Electrolux EHT6433K Manuale Utente Scaricare il pdf (Pagina 6)

electrolux 33

Hob burners control knobs

The symbols on the knobs mean that :

there is no gas supply

there is maximum gas supply

there is minimum gas supply

Lighting the burners

For easier lighting, proceed before putting a pan on the pan

support.

To light a burner, turn the relevant knob anticlockwise to maximum

position (

)and push down the knob to ignite.

After lighting the flame, keep the knob pushed

down for about 5 seconds. This will allow

the "thermocouple" to be heated and the

safety device to be switched off, otherwise

the gas supply would be interrupted. Then,

check the flame is regular and adjust it as

required. If you cannot light the flame even

after several attempts, check the "cap" is in

the correct position.

If you cannot light the flame even after

several attempts, check the "cap" (lett. A)

and the "crown" (lett. B) are in the correct

position.

To put the flame out, turn the knob to the

symbol

In the absence of electricity, ignition can

occur without the electrical device; in this case approach the

burner with a flame, push the relevant knob down and turn it anti-

clockwise until it reaches the "maximum" position.

Operation

A - Burner cap

B - Burner crown

C - Ignition electrode

D - Thermocouple

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Nessun commento

Electrolux EHT6433K Manuale Utente Pagina 6