Electrolux ERCE9025BK Manuale Utente Scaricare il pdf (Pagina 9)

electrolux canopy rangehood using the rangehood 9

Using the rangehood

Touch control operation

Fan – select speed to suit cooking conditions.

low – light frying/boiling

medium – frying/wok cooking/heavy boiling

high – grilling, intensive frying and wok cooking

To switch Lights ON and OFF

Touch the ‘light’ symbol to turn the lights ON, if

adjustment to light intensity is required continue to touch

and hold until required brightness is achieved.

Touch ‘light’ symbol againtoturnthelightsOFF.

Using the Timer

At the end of cooking, if the timer is switched on, the

rangehood will continue to run for an additional 5 to 15

minutes, depending on the selected fan speed.

The fan speed is reduced in 5 minute increments until the

rangehoodturnsitselfOFF.

ie. if the fan speed is set on high, it will run for 5 minutes

then reduce to medium for 5 minutes, then reduce to low

for5minutesbeforenallyturningitselfOFF.

This should ensure the removal of any odours that remain

after cooking.

Filter

This is the indicator/switch to show when the ﬁlter needs

to be cleaned.

Oncetheltersarecleanedthe“Filter”alertcanbedeactivated

with a single touch.

Maintenanceandcleaning

caution

• Before maintenance or cleaning is carried out,

the canopy rangehood should be disconnected

from the main power supply. Ensure that the

rangehood is switched off at the wall socket

and the plug removed.

• External surfaces are susceptible to scratches

and abrasions, so please follow the cleaning

instructions to ensure the best possible result is

achieved without damage.

Stainless Steel Surface

Cleanstainlesssteelsurfacesusingnon-abrasivecleaning

products that are speciﬁcally for use on stainless steel.

To ensure best results also use an even pressure and follow

the grain of the stainless steel. Use of a soft cloth reduces

the risk of scratching. If the cloth is wet ensure that a dry

soft cloth is used to wipe down the surface again reducing

the risk of any surface rust appearing.

Control panel surface

The control panel can be cleaned using warm soapy water.

Ensure the cloth is well wrung before cleaning. Use a dry

soft cloth to remove any excess moisture left after cleaning.

Cleaning grease lters

The mesh ﬁlters can be cleaned by hand in warm soapy

water. Soak in warm water and some washing up liquid.

Forstubborngreasestainsuseasoftnylonbrushtohelp

remove these stains. After cleaning ensure that the ﬁlters

are completely dry before reﬁtting.

Changing the halogen lamps

Ensure lamp is cool before removing

To remove the lamp, apply pressure to the lamp and turn

anti-clockwisetounscrewandremove.

Replace the lamp with one of similar type and voltage.

fan

1 2 3 4 5 6 7 8 9 10 11 12

Commenti su questo manuale

Nessun commento

Electrolux ERCE9025BK Manuale Utente Pagina 9

Commenti su questo manuale

Prodotti e manuali riguardandi Piani cottura Electrolux ERCE9025BK