Electrolux EKD60760X 230V Manuale Utente Scaricare il pdf (Pagina 52)

51

The anti-tip guard

The anti-tip guard must be fitted to

prevent the cooker from tipping over

with abnormal loads.

The anti-tip guard only works when

the cooker has been pushed into

place.

How you fix the anti-tip guard to

the cooker:

1 Before fitting the anti-tip guard,

make sure that the cooker has

been adjusted to the correct

height and is standing level

(see page 50).

2 The attachment (B) is fitted to

the left side when delivered.

Measure out where the anti-tip

guard (A) is to be located, 60

mm (2.4") down from the edge

of the ceramic glass plate and

50 mm (2.0") from the

wall(cupboard). Screw it firmly

into solid material or use

suitable reinforcement. The

entire anti-tip guard (A+B) can

also be located on the right-

hand side (

SEE

F

IG

. 1).

Make sure that the surface

behind the cooker is smooth.

If there are tiles or a

moulding behind

the edge of

the ceramic glass plate then

there must be a space with

the same dimension between

the anti-tip guard and the

wall. This is so that the anti-

tip guard is firmly attached to

the cooker and functions

correctly.

Check that the anti-tip guard

projects at least 20 mm (0.8")

into the hole in the back of

the cooker (B) when the

cooker is pushed in (

SEE

F

IG

.

2).

NOTE! If the space between the

bench cupboards is greater than the

width of the cooker, then you must

adjust the side measurement if you

want to centre the cooker.

2

1

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Commenti su questo manuale

Nessun commento