Electrolux EHT9780K Manuale Utente Scaricare il pdf (Pagina 20)

TYPE OF TYPE OF NOZZLE NOMINAL REDUCED NOMINAL NOMINAL

GAS BURNER MARKING HEATING HEATING PRESSURE

1/100 mm CAPACITY kW FLOWRATE mbar

CAPACITY kW

/h g/h

Triple crown 146 3.8 1.20 0.362 -

Semirapid (medium) 96 1.9 0.45 0.181 - 20

Auxiliary (small) 70 1.0 0.33 0.095 -

Triple crown 98 3.8 1.20 - 273

Semirapid (medium) 71 1.9 0.45 - 137 28-30/37

Auxiliary (small) 50 1.0 0.33 - 72

NATURAL

GAS

(Methane)

LIQUIFIED

GAS

(Butane/

Propane)

Fig. 7

FO 0392

Minimum flame adjustment

To adjust the minimum flame, proceed as follows.

1. Light the burner as previously described.

2. Turn the cock to the min. flame position.

3. Extract the knobs.

4. Adjust the by-pass pin indicated in Fig. 8.

• When converting from natural gas to LPG, screw

down the by-pass pin clockwise.

• When converting from LPG to natural gas, unscrew

the by-pass pin 1/4 turn (approx.).

• In any case, the result must be a small and even

flame on all the burner crown

5. Lastly, check that the burner does not go off when

quickly turning the cock from max. to min.

The above adjustment operations can be easily performed,

whatever the positioning or fixing of the cooktop to the

cabinet.

Replacing nozzles

1. Remove the grates.

2. Remove the burner caps and flame spreaders.

3. Using a 7 mm socket wrench, unscrew and remove

(Fig. 7) the nozzles, replacing them with those required

for the type of gas used (refer to the table on this page).

4. Refit the parts by carrying out the above operations in

reverse order.

5. Then replace the rating plate (located near the gas

connection) with that corresponding to the new type of

gas. The latter is included in the bag of injectors

supplied.

If the pressure of the gas used is different (or variable)

from that provided for, a suitable pressure regulator for

the piped gas (NOT LPG) complying with Standard,

must be installed on the inlet piping.

The use of pressure regulators for liquified gases (LPG)

is allowed provided they comply with Standard.

By-pass pin

for min. flame adjustment

Fig. 8

By-pass diameters

Burner Ø Cock

by-pass

in hundredths

Auxiliary 28

Semirapid 32

Triple crown 56

Conversion to other types of gas

1 2 ... 15 16 17 18 19 20 21 22 23 24

Commenti su questo manuale

Nessun commento

Electrolux EHT9780K Manuale Utente Pagina 20

Commenti su questo manuale

Prodotti e manuali riguardandi Piani cottura Electrolux EHT9780K