Electrolux EHGL3CN Manuale Utente Scaricare il pdf (Pagina 29)

A

A

A A

B

A

A

D

N 550 (-0,+1) mm

20

mm

A 767

mm

N 780

mm

A 549 mm

435

mm

A 757

mm

160

mm

170

mm

600 mm

N 762 + 3

mm

~50 mm

4. Use a minimum of 2 screws to attach

the oven on the 2 sides (A).

When installing next to a wood-fuelled

boiler, a heatproof and heat-insulating

plate must be mounted at the height

of the appliance and at least 30 cm

deep.

A B

A

min. 20 mm

10

mm

20 mm

12.2 Electrical connection

WARNING!

If service is required always

disconnect the appliance

from the power supply.

Use a power cable of H05VV-F or higher.

Install the appliance with a socket supply

line. If there is no socket supply line, the

fixed home electrical system must include

an isolating device with at least a 3 mm-

contact separation to enable a

simultaneous and all-pole cut off from the

mains (according to NIN SEV 1000). The

customer must have a socket for the

electrical connection that is accessible

and outside the coordination room. The

length of the connection cable must be

approximately 120 cm with lines

connected directly to the mains.

Only a qualified person can

connect the appliance to the

electricity supply.

1. Open the mains terminal cover (D).

D

E

F

2. Put the connection cable into the

supplied rings (E).

This is to prevent the cable from

rubbing against the drawer. The

connection cable is on the housing

side.

3. Install the cable grip (F).

4. Connect the terminal as in the

illustration.

5. Put the cable into the strain relief

clamp.

6. Close the mains terminal cover.

7. Do the electrical connections as in the

connection illustration.

Phase definitions: L1, L2, L3 (or R, S,

T).

Voltage: 400V

8. Secure the cable grip.

ENGLISH

29

1 2 ... 24 25 26 27 28 29 30 31 32

Commenti su questo manuale

Nessun commento