Electrolux ESF6800ROX Manuale Utente Scaricare il pdf (Pagina 13)

• If the display shows the salt mes-

sage, fill the salt container.

• If the display shows the rinse aid

message, fill the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

• If you use combi detergent tablets,

activate the Multitab option.

5. Set and start the correct programme

for the type of load and the degree of

soil.

7.1 Using the detergent

20

30

M

A

X

1

2

3

4

+

-

A

B

C

1.

Press the release button (B) to open

the lid (C).

2.

Put the detergent in the compartment

(A) .

3.

If the programme has a prewash

phase, put a small quantity of deter-

gent on the inner part of the appli-

ance door.

4.

If you use detergent tablets, put the

tablet in the compartment (A).

5.

Close the lid. Make sure that the re-

lease button locks into position.

7.2 Setting and starting a

programme

The Auto Off function

To decrease the energy consumption, this

function automatically deactivates the ap-

pliance a few minutes after:

• You have not closed the door.

• You have not pressed OK to start the

programme.

• The programme is completed.

Starting a programme without

delay start

1. Open the water tap.

2.

Press the on/off button to activate the

appliance.

3. Close the appliance door.

4. Set the applicable options.

5.

Set a programme.

• Press one of the navigation touch-

pads to go through the programme

menu and select a programme.

Press OK to confirm. The pro-

gramme starts.

• If you want to start the MyFavourite

programme, press MyFavourite .

The programme starts.

When a programme starts, the display

shows:

• Duration of the programme that de-

creases with steps of 1 minute.

• Symbol of the programme.

• In the lower part of the display a pro-

gramme bar is visible. While the pro-

gramme operates, the middle seg-

ments come on with fixed light, while

the 2 lateral segments flash. The num-

ber of segments with fixed light increa-

ses as the programme progresses.

Starting a programme with delay

start

1.

Set the applicable options.

2. Set a programme.

3.

Press Delay. The display shows:

• Start : Start time of the programme.

• End : End time of the programme.

4.

Press the navigation touchpad on your

right to set the delay. You can delay

the start of the programme from 1 to

24 hours. As the number of hours in-

creases the time indicated in Start and

End is updated. To decrease the num-

ber of hours press the navigation

touchpad on your left.

5. Press OK to confirm and to start the

countdown of the delay start. When

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Commenti su questo manuale

Nessun commento